WT-9501 密碼鎖說明書:

線路板通電, 蜂鳴器發出”嘀, 嘀” 聲, 表示線路板自檢工作正常。

一, 出廠統一密碼為 “6611” 。

二, 開門:
1. 輸入正確的密碼密碼後, 按”#”鍵確認, 綠燈亮, 表示密碼正確, 電磁閥吸合6秒可進行開門動作。
2. 如果輸入錯誤密碼, 蜂鳴器發出”嘀’, 嘀, 嘀, 嘀” 聲。
3. 如果連續三次輸入錯誤密碼, 按鍵鎖死約一分鐘, 此時按任何鍵無反應。

三, 密碼編制方法:
1. 輸入設定的密碼”6611”, 數. 按”#”鍵確認, 綠燈亮, 開門。
2. 此時按”*”鍵綠燈滅, 輸入你所要設定的新密碼(1-12位數字),按”#”鍵確認, 蜂鳴器發, ”嘀, 嘀, 達” 聲, 表示輸入成功。

四, 恢復出廠密碼:
開門後按清碼鍵(黑色按扭), 蜂鳴器發出”嘀, 嘀, 達” 聲, 密碼恢復到出廠統一密碼為”6611” 。

五, 電源:
產品用2節1.5伏鹼性電池, 電壓低於一定水平會導致在開門時紅燈亮, 提醒你盡快更換新的電池。

WT-9501 Electric Pin Lock Specification
*********************************

Inner electric frame, sound “Dik, Dik” means it works normal after self investigation.

(i) Ex. Factory Pin Number “6611”

(ii) Open Door
(1) Key in correct pin number, press “#” to confirm, see green light means password correct, release lock in 6 seconds, door can be opened.
(2) If key in wrong pin number, sound “Dik, Dik, Dik, Dik”
(3) If key in wrong pin number for 3 times, the lock will dead for 1 minute, within this period there will be no response for press any key.

(iii) Create private pin number
(1) Key in Ex. Factory Pin number “6611”, press “#” to confirm, see green light and open door.
(2) Then press “ * ” green light off, key in new pin number (1-12 number), press “# ” to confirm, sound “Dik, Dik, Tak” mean success key in new pin number.

(iv) Back to Ex. Factory Pin number.
Open door and press small “Black” button, sound “Dik, Dik, Tak”, then the pin will back to “6611”.

(v) Battery
Size : AAA 1.5v batteries x 2 nos. Red light means low battery reminder, user has to change battery as soon as possible.